Join the firm

Careers

Ground Force Engineering is a small firm with a broad practice, from residential foundation repair to commercial buildings and solar facilities. Engineers here are involved in projects from inspection or initial design through construction.

Open positions

Structural Engineer II/III

  • 4+ years of structural design experience
  • Remote within North Carolina

Ground Force Engineering is seeking an entrepreneurial, self-driven structural engineer to run projects and help build the firm. The engineer designs and carries projects from the first site visit through construction, reports directly to the principal engineer, and moves work forward without waiting for the next instruction. The position will be filled at Structural Engineer II or III, depending on experience. Structural design experience is required; civil experience is welcome but does not replace it. There is room to move into project management and to lead new services as they are added.

Responsibilities

  • Perform structural analysis and design of members, connections and foundations for new residential and commercial buildings, the repair of existing buildings, and solar and battery storage facilities.
  • Prepare and check calculations, plans and details, and work with CAD staff to issue complete, consistent drawing sets.
  • Visit sites to assess structural damage and observe construction, and write clear findings and repair recommendations.
  • Coordinate structural design with civil plans, site conditions and other disciplines.
  • Serve as the main contact for clients, contractors and plan reviewers on each project, and answer construction questions promptly.
  • Build relationships with builders, contractors and developers, help prepare proposals and bring in new work.
  • Plan and meet project deadlines, and raise problems early.

Required qualifications

  • Bachelor's degree in civil or structural engineering from an accredited university.
  • At least four years of structural engineering experience performing analysis and design of members, connections and foundations. Civil experience is welcome but does not count toward the four years.
  • Active North Carolina PE license, or the ability to obtain one within three months of starting.
  • A strong understanding of load paths and structural behavior, and design in wood, steel and concrete to current codes, including the IBC, ASCE 7, AISC, ACI and NDS.
  • Structural analysis software such as RISA-3D, ETABS, SAP2000 or STAAD.Pro, and the habit of checking its results by hand.
  • AutoCAD proficiency and experience preparing or revising construction documents.
  • A record of owning projects and carrying them through with little day-to-day direction, and the judgment to know when a design needs a second look.
  • Clear written and verbal communication with clients, contractors and the team.
  • A valid driver's license for site visits.

Preferred qualifications

  • Foundation design or repair, helical pile or field inspection experience.
  • Light-frame wood and masonry design.
  • Work on residential, commercial, solar or telecommunications projects. Experience in every sector is not required.
  • Civil engineering experience, including coordinating structural design with site and civil requirements.
  • A history of bringing in clients or starting a new service.

With your application, include your North Carolina licensure status, a few structures you designed yourself, and one example of work you started on your own initiative and carried through.

Apply

Structural Engineer I

  • Up to 3 years of structural experience
  • Strong AutoCAD proficiency required
  • Remote within North Carolina

Ground Force Engineering is seeking a Structural Engineer I with up to three years of structural experience, structural design training and strong AutoCAD skills. The role turns engineering sketches, markups and design direction into clear structural drawings, assists with structural calculations, and grows into design under the direction of experienced engineers. Structural experience in residential, building, solar or telecommunications projects will be considered, including internships, co-ops and academic projects. Civil experience is welcome alongside it but does not replace structural experience.

Responsibilities

  • Prepare and revise structural plans, framing and foundation plans, sections and details in AutoCAD.
  • Translate engineer sketches and review comments into accurate drawings and complete revisions consistently.
  • Assist with structural calculations, including loads, member sizing and foundation checks, as directed and reviewed by an engineer.
  • Build and check simple models in structural analysis software such as RISA-3D.
  • Manage layers, blocks, external references, dimensions, layouts, viewports and plotting settings.
  • Check drawing scales, dimensions, notes, references and sheet consistency before submitting work for review.
  • Flag missing dimensions, conflicting details or unclear instructions, and maintain organized drawing files that follow company drafting standards.

Required qualifications

  • Bachelor's degree in civil or structural engineering from an accredited university, with coursework in structural analysis and in steel, concrete or wood design.
  • Up to three years of structural engineering, design or drafting experience from employment, internships or co-ops. Civil experience is welcome alongside it but does not replace structural experience.
  • High proficiency in AutoCAD, with the ability to produce and revise drawings efficiently and accurately.
  • Working knowledge of model space, paper space, external references, layers, blocks, dimensions and plotting to scale.
  • Ability to read structural plans, sections and details and follow engineering markups.
  • Strong attention to detail, willingness to ask questions and ability to incorporate feedback.
  • Good organization, communication and ability to meet assigned deadlines.

Preferred qualifications

  • A passed FE exam, or an EI or EIT certification.
  • Structural analysis software such as RISA-3D, ETABS, SAP2000 or STAAD.Pro.
  • Foundation, helical pile or wood-frame design experience.
  • Graduate coursework in structural engineering.

With your application, describe your structural work and your AutoCAD experience. Drawing samples you are authorized to share are welcome.

Apply

Apply

Application

Complete the form and attach a resume.

States, if applicable.

For example RISA-3D, AutoCAD, Revit, LPILE.

Some roles include crawlspaces, ladders and active construction sites.

PDF or Word, up to 2 files and 5 MB total.

Applicant information. Applications reach the firm by email through our website and email service providers, and are used only to evaluate the application. Do not include a Social Security number, date of birth or medical information.

Ground Force Engineering PLLC is an equal opportunity employer. Applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status or any other characteristic protected by law. Employment in North Carolina is at will.